®
Operating Instructions
DVD/CD PLAYER
The illustration shows DVD-S27 for U.S.A. and Canada.
Model No.
DVD-S27/DVD-S27U/DVD-S24
Dear customer
Table of contents
T
hank you for purchasing this product. For optimum performance and
safety, please read these instructions carefully before connecting,
operating or adjusting this product. Please keep this manual for future
reference.
Getting started
IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . 2
Accessories/Discs that can be played/Disc handling . . . . . 3
STEP 1 The remote control . . . . . . . . . . . . . . . . . . . . . 4
STEP 2 Connection to a television. . . . . . . . . . . . . . . 4
STEP 3 QUICK SETUP . . . . . . . . . . . . . . . . . . . . . . . . . 4
Operations
Region number
Basic play. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Enjoying higher quality audio and video . . . . . . . . . . . . . . . . . . . . . 5
Changing the play sequences . . . . . . . . . . . . . . . . . . . . . . . . 6
Using navigation menus. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Convenient functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Using On-Screen Menus. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Changing the player settings . . . . . . . . . . . . . . . . . . . . . . . . 10
The player plays DVD-Video marked with labels containing the region
number or “ALL”.
Region
Number
U.S.A.,Canada and units with PX printed on the
outer packaging
The Middle East and South Africa
1
2
3
4
5
Asia
Reference
Australia and N.Z.
Russia
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Troubleshooting guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Product Service/Maintenance . . . . . . . . . . . . . . . . . . . . . . . 13
Limited Warranty (ONLY FOR U.S.A) . . . . . . . . . . . . . . . . . 14
Example: [U.S.A.\and\Canada[
1
2
1
ALL
Referencia rápida en español
4
(Spanish Quick Reference). . . . . . . . . . . . . . . . . . . . . . . 15
Main feature index. . . . . . . . . . . . . . . . . . . . . . . . . Back cover
Unless otherwise indicated, illustrations in these operating
instructions are DVD-S27 for U.S.A. and Canada.
This manual was printed with soy based ink.
P
PC GCS GCU GN
GC GCA EE
PX
RQT7240-1P
Accessories
(Only for U.S.A.) To order accessories, refer to “Accessory Purchases” on page 14.
(For other areas) To order accessories, call the dealer from whom you have made your purchase.
Use numbers when asking for replacement parts.
∏ 1 Remote control
∏ 1 AC power supply cord
[U.S.A.\and\Canada]
(EUR7631020)
∏ 1 Audio/video cable
(JAC3315N)
∏ 2 Remote control batteries
(K2CB2CB00006)
(K2CJ2DA00008)
\Units\with\PX\printed\on\the\outer\packaging\
∏ 1 Power plug adaptor
\Australia\and\N.Z.]
[United\Arab\Emirates,\South\Africa,\Asia,\Russia,\
(K2DA42E00001)
\and\units\with\PX\printed\on\the\outer\packaging] (RJA0019-2X)
∏ 2 AC power supply cords
[The\Middle\East]except\United\Arab\Emirates\
(RJA0019-2X)
(RJA0053-3X)
[For\Saudi\Arabia\
[Note]
The included AC power supply cord is for use with this unit only. Do not
use it with other equipment.
Discs that can be played
Indication
in these
operating
instructions
Disc
Logo
Remarks
Recorded using Version 1.1 of the Video
≥ Recorded with DVD video recorders, DVD
[RAM]
Recording Format (a unified video
recording standard).
video cameras, personal computers, etc.
≥
≥
Remove discs from their cartridges before use.
DVD-RAM
Recorded using the DCF (Design rule for
Camera File system) standard.
Recorded with Panasonic DVD-Video recorders
≥ To play JPEG files, select “Play as Data
[JPEG]
Disc” in Other Menu (➜ page 9).
—
DVD-Video
DVD-R
Panasonic DVD-R recorded and finalized§ on a Panasonic DVD-Video recorders or DVD-
Video cameras are played as DVD-Video on this unit.
[DVD-V]
—
Video CD
SVCD
[VCD]
Conforming to IEC62107
—
CD
[CD]
[WMA]
[MP3]
[JPEG]
[CD]
≥This unit can play CD-R/RW (audio recording disc) recorded with the formats on the left.
Close the sessions or finalize§ the disc after recording.
≥HighMAT discs
CD-R
CD-RW
—
WMA, MP3 or JPEG files only.
To play without using the HighMAT function, select “Play as Data Disc” in Other Menu
(➜ page 9).
[VCD]
§A process that allows play on compatible equipment.
≥It may not be possible to play the above discs in all cases due to the type of disc or condition of the recording.
∫ Discs that cannot be played
DVD-Audio, DVD-ROM, CD-ROM, CDV, CD-G, DVD
iR,
iRW, DVD-RW,
HighMAT™ and the HighMAT logo are either
trademarks or registered trademarks of
Microsoft Corporation in the United States and/
or other countries.
SACD, Divx Video Discs and Photo CD, DVD-RAM that cannot be removed from
their cartridge, 2.6-GB and 5.2-GB DVD-RAM, and “Chaoji VCD” available on
the market including CVD, DVCD and SVCD that do not conform to IEC62107.
∫ Audio format of DVDs
You can play discs in stereo with these
symbols.
Disc handling
≥ Do not write on the label side with a ball-point pen or other writing
instrument.
∫ To clean discs
[DVD-V] [VCD] [CD]
≥ Do not use record cleaning sprays, benzine, thinner, static electricity
prevention liquids or any other solvent.
Wipe with a damp cloth and then wipe dry.
[RAM] [DVD-R]
≥ Do not use scratch-proof protectors or covers.
≥ Do not use the following discs:
≥
Clean with an optional DVD-RAM/PD disc cleaner (LF-K200DCA1, where available).
≥Never use cloths or cleaners for CDs etc.
– Discs with exposed adhesive from removed stickers or labels (rented
discs etc).
∫ Handling precautions
– Discs that are badly warped or cracked.
– Irregularly shaped discs, such as heart shapes.
≥Do not attach labels or stickers to discs (This may cause disc warping,
rendering it unusable).
3
STEP 1 The remote control
≥Insert so the poles (i and j) match those in the
Mishandling of batteries can cause electrolyte
leakage which can damage items the fluid contacts
and may cause a fire.
∫ Batteries
remote control.
R6/LR6, AA, UM-3
≥Do not use rechargeable type batteries.
Do not:
≥mix old and new batteries.
≥use different types at the same time.
≥heat or expose to flame.
Remove if the remote control is not going to be used
for a long period of time. Store in a cool, dark place.
∫ Use
Aim at the remote control sensor, avoiding obstacles,
at a maximum range of 7 m (23 feet) directly in front
of the unit.
≥take apart or short circuit.
≥attempt to recharge alkaline or manganese
batteries.
≥
use batteries if the covering has been peeled off.
STEP 2 Connection to a television
≥Do not place the unit on amplifiers or equipment that may become hot. The heat can damage the unit.
≥Do not connect through the video cassette recorder. Due to copy guard protection, the picture may not display properly.
≥Turn off all equipment before connection and read the appropriate operating instructions.
≥Connect the terminals of the same color.
Television
VIDEO IN or S VIDEO IN
WITH
COMPONENT VIDEO IN
WITH
COMPONENT
VIDEO IN
AUDIO IN
AUDIO IN
VIDEO
IN
S VIDEO
IN
R
L
R
L
S video cable§
Audio/video
Video
cables
Audio/video
cable
(included)
Not used
cable (included)
To enjoy progressive video
Connect to a progressive output
compatible television.
1 Select “Enable” in the progressive
output setting in QUICK SETUP
(➜ see below).
2 Set “Video Output Mode” in Picture
Menu to “480P” (➜ page 9).
All Panasonic televisions with 480P input
connectors are compatible. Consult the
manufacturer if you have another brand
of television.
§When using this connection, the audio cable
(red and white plugs) should also be
connected.
\U.S.A.,\Canada\and\units\with\PX\printed\on\the\outer\packaging\
You can connect the audio cable to the 2-
channel audio input terminals of an
≥Select “Darker” from the “Black Level Control” in the “Video”
tab (➜ page 10).
analog amplifier or system component to
Back of the unit
enjoy stereo.
∫ Connect the AC power supply cord last
For units with PX printed on the outer packaging
If the power plug does not fit your AC
outlet, use the power plug adaptor
(included).
AC power supply cord
(included)
If it still doesn’t fit, contact an electrical
parts distributor for assistance.
To household AC outlet
∫ Enjoying multi-channel surround sound
AC IN
Amplifier with a
built-in decoder or a
decoder-amplifier
combination
Coaxial cable
Conserving power
This unit consumes a small amount of power, even
when it is turned off (1 W). To save power when the
unit is not to be used for a long time, unplug it from
the household AC outlet.
COAXIAL IN
Change “PCM Digital Output”,
“Dolby Digital”, “DTS Digital
Surround” and “MPEG§” in “Audio”
tab (➜ page 10).
[For[Saudi]Arabia\
[The\Middle\East\
Back of the unit
≥Use the AC power supply cord that matches the
socket for the area you live in.
§MPEG: [The\Middle\East,\South\Africa,\Russia,\Australia\and\N.Z.]
STEP 3 QUICK SETUP
Turn on the television and select the appropriate video input on the television. 4
5
AV ENHANCER FL SELECT OPEN/CLOSE
1
2
3
ADVANCED
SURROUNDPICTURE MODE REPEAT
RETURN
SETUP
SETUP
ENTER
ENTER
DIRECT NAVIGATOR
PLAY LIST
TOP MENU
DISPLAY
MENU
ENTER
Power ON. Shows QUICK
SETUP screen.
Follow the message
and make the settings.
Press to finish
QUICK SETUP.
Press to
exit.
RETURN
SUBTITLE AUDIO ANGLE/PAGE SETUP
To change these settings later
Select “QUICK SETUP” in “Others” tab (➜ page 10).
PLAY MODE SLEEP
ZOOM
GROUP
4
Basic play
Stop Pause
1Power ON.
2Open the disc tray.
AV ENHANCER FL SELECT OPEN/CLOSE
ADVANCED
SURROUND PICTURE MODE REPEAT
1
4
2
5
8
0
3
6
PLAY SPEED
POSITION MEMORY
QUICK REPLAY
7
CANCEL
9
10
SKIP
SLOW/SEARCH
STOP
PAUSE
PLAY
Remote control
signal sensor
DIRECT NAVIGATOR
TOP MENU
PLAY LIST
MENU
Press to skip.
3Load the disc.
4Start play.
Press and hold to
–search
–slow-motion.
ENTER
≥
Load double-sided discs so
the label for the side you
want to play is facing up.
DISPLAY
RETURN
SUBTITLE AUDIO ANGLE/PAGE SETUP
The position is memorized when
“!” flashes on the display.
≥Press [1] (PLAY) to resume.
[DVD-V] To review the previous
chapters (➜ page 8, Position
memory).
[RAM] [DVD-V] [VCD] [CD]
e.g. To select 12:
STOP
[S10] ➜ [1] ➜ [2]
1
4
7
2
5
8
0
3
6
Stop
Pause
Skip
[VCD] with playback control
While stopped, press the
numbered buttons.
Enter number
9
≥Press [∫] to clear the position.
10
[WMA] [MP3] [JPEG]
e.g. To select 123:
[1] ➜ [2] ➜ [3] ➜ [ENTER]
≥Press [1] (PLAY) to restart
play.
PAUSE
[DVD-V]
Shows a disc top menu
(Group skip [WMA] [MP3] [JPEG])
TOP MENU
SKIP
[DVD-V]
Shows a disc menu
ENTER
Disc menu
MENU
[VCD]
Shows a disc menu
RETURN
≥Up to 5 steps
Search
≥Press [1] (PLAY) to start play.
≥[VCD] Slow motion, forward
direction only
(during play)
SLOW/SEARCH
Slow-motion
Return to
previous
screen
(during pause)
RETURN
≥[VCD] forward direction only
Frame-by-
ENTER
frame
Number display
:;
Time display
Main unit
display
FL SELECT
(during pause)
Select
[WMA] [MP3] [JPEG]
Turns the information screen on/off
Information
screen
SUBTITLE
On-screen
item select
ENTER
Register
∫ Standby/on switch (Í/I)
Press to switch the unit from on to standby mode or vice versa. In
standby mode, the unit is still consuming a small amount of power.
If you are experiencing problems, refer to troubleshooting guide
(➜ page 12, 13).
\Units\sold\outside\the\U.S.A\and\Canada\
Standby/on indicator (Í)
[Note]
When the unit is connected to the AC mains supply, this indicator
Discs continue to rotate while menus are displayed. Press [∫] when you
finish to preserve the unit’s motor and your television screen.
lights up in standby mode and goes out when the unit is turned on.
Enjoying higher quality audio and video
PICTURE MODE
Picture Mode
AV ENHANCER
AV Enhancer
(Main unit)
[RAM] [DVD-V] [VCD] [JPEG]
Menu
Press [PICTURE MODE] to change the
picture quality for movie viewing.
By just pressing this one button the disc type is
automatically determined and the best audio and
Menu
Picture Mode Normal
video settings which are indicated below are
configured.
Normal
AV Enhancer
On
Cinema1: Mellows images and enhances detail in dark scenes.
Cinema2: Sharpens images and enhances detail in dark scenes.
Press [AV ENHANCER] to select “On”.
Animation
Dynamic
Audio settings: Advanced Surround (➜ page 6)
Dialogue Enhancer (➜ page 9)
Video settings: Picture Mode (➜ right)
≥
When AV Enhancer is on, individual settings can no longer be changed.
5
Enjoying higher quality audio and video
Using navigation menus
(➜
Refer to the back cover for remote control button positions)
(
➜
Refer to the back cover for remote control button positions)
ADVANCED
SURROUND
Playing data discs
Advanced Surround
[WMA] [MP3] [JPEG] [CD] (CD-text only)
MENU
[RAM] [DVD-V] [VCD] (2 or more channels)
[WMA] [MP3] [JPEG]
Menu
You can play JPEG files on DVD-RAM or play HighMAT discs without using
the HighMAT function (➜ page 9, “Play as Data Disc” in Other Menu).
Press [ADVANCED SURROUND] to
select “SP1” ,“SP2”,“HP1”or “HP2”.
Advanced Surround SP1
∫ Using playback menus (except JPEG files on DVD-RAM)
SP (Speaker) 1 Natural
HP (Headphone) 1 Natural HP 2 Enhanced Off
SP 2 Enhanced
While the menu is displayed
Press [3 4] to select “All”, “Audio”, or “Picture” and press
[ENTER].
≥When using discs recorded with surround sound, sound seems to come
from speakers on either side of you.
≥To display/exit the screen
≥When using headphones from the connected equipment, select “HP 1”
Press [TOP MENU].
or “HP 2”.
∫ Using navigation menus
≥Optimum seating position is 3 to 4 times the distance between the front
left and right speakers or the width of the television if using the
television’s speakers.
1
2
Press [MENU].
Press [3 42 1] to select the group or audio/picture
content and press [ENTER].
≥Do not use in combination with surround effects on other equipment.
Group and content number
currently playing
Changing the play sequences
N
avigation
M
enu
JPEG
5
002 My favorite2 005 Japanese 001 Lady Starfish
(➜
Refer to the back cover for remote control button positions)
:JPEG files
Perfume
001 My favorite1
002 My favorite2
001 Brazilian
002 Chinese
003 Czech
001 Lady Starfish
002 Metal Glue
003 Life on Jupiter
004 Starperson
PLAY MODE
:WMA/MP3 files
Program/Random play
004 Hungarian
005 Japanese
006 Mexican
007 Philippine
008 Swedish
009 Piano
[DVD-V] [VCD] [CD] [WMA] [MP3] [JPEG]
010 Vocal
While stopped, press [PLAY MODE].
Each time you press the button:
Group 005/023
Content 0001/0004
Number currently selected
DISPLAY
RETURN to exit
to display the sub menu
Program -------------------------------------) Random
^-------------Off (Normal play),-----------b
Audio/picture contents
Group
≥To enjoy listening to WMA/MP3 contents while showing a JPEG
image on the screen
≥Disable HighMAT disc play to use random and program play.
Select “Play as Data Disc” in Other Menu (➜ page 9).
Select a JPEG file first, and then select audio contents.
(The opposite order is not effective.)
≥To exit the screen
e.g. [DVD-V]
∫ Program play (up to 32 items)
1
Press the numbered buttons to
select the items ([WMA] [MP3] [JPEG]
then press [ENTER]).
Choose a title and chapter.
Title Chapter
Press [MENU].
No.
1
Time
Play
Using the submenu [WMA] [MP3] [JPEG]
Clear
Clear all
Repeat this step to program other items.
1
While the menu is displayed, press [DISPLAY].
2
Press [1] (PLAY).
Groups and content
Multi
List
Tree
Thumbnail
Selecting all the items
(on the disc or in the title or group)
Press [ENTER] and [3 4] to select “ALL”, then press [ENTER] again to
register.
Content only
Groups only
Thumbnail images [JPEG]
To the next group [WMA] [MP3]
Next group
Changing the program
Press [3 4] to select an item.
To the previous group [WMA] [MP3]
Previous group
–To change an item, repeat step 1.
–To clear an item, press [CANCEL] (or select “Clear” and press [ENTER]).
≥Press [ANGLE/PAGE] to skip page by page.
WMA/MP3 and JPEG files
All
Audio
Picture
WMA/MP3 files only
JPEG files only
To switch between guide messages and
the elapsed play time indicator
Clearing the whole program
Select “Clear all” and press [ENTER]. The whole program is also cleared
when the unit is turned off or the disc tray is opened.
Help display
Find
To search by content or group title (➜ see below)
∫ Random play
2
Press [3 4] to select the submenu and press [ENTER].
1
([DVD-V] [WMA] [MP3] [JPEG])
e.g. [DVD-V]
Press the numbered buttons to
select a group ([WMA] [MP3] [JPEG]
then press [ENTER]) or a title.
Press [1] (PLAY).
Random Playback
∫ Searching by a content or group title
Choose a title.
[WMA] [MP3] [JPEG]
Title
1
Place the cursor on the group title to search a group, or place the cursor
on the content title to search content.
to start
PLAY
0
~
9
to select
2
1
Select “Find”
(➜ see above).
¢
A
Find
To exit the program or random mode
Press [PLAY MODE] several times while stopped.
2
Press [34] to select a character and press [ENTER].
≥Repeat to enter another character.
≥Lower case is also searched.
≥Press [6 5] to skip between A, E, I, O and U.
≥Press [2] to erase a character.
≥Erase the asterisk (¢) to search for the titles starting with that
character.
Press [1] to select “Find” and press [ENTER].
The search result screen appears.
Press [3 4] to select the content or group and press
[ENTER].
REPEAT
Repeat play
(Only when the elapsed play time can be displayed
[JPEG]: Works with all JPEG content.)
Press [REPEAT] several times to select
an item to be repeated.
3
4
Menu
Repeat
Off
6
DIRECT NAVIGATOR
To use the contents screen to find a track
[CD] (CD text only)
Playing the programs [RAM]
While the menu is
displayed
CD-Text
1/23
2
01
1
2
Press [DIRECT NAVIGATOR].
Disc Title:
Disc Artist:
Track Title:
All By Artist
Pink Island
≥Titles appear only if you have
entered them.
≥You cannot change program
and disc titles.
Press [3 4] or the
numbered buttons to
select the program.
≥Press [ANGLE/PAGE] to skip
page by page.
Press [3 4] to move
through the tracks
and press [ENTER].
≥Press [ANGLE/PAGE] to
skip page by page.
Direct Navigator
Long John Platinum
Track Artist: SHIPWRECKED
1.
2.
3.
4.
Ashley at Prom
City Penguin
Formura one
Soccer
Date
11/ 1(WED)
On
Contents
No.
T i t l e
Monday feature
Baseball
5.
6.
1
2
3
4
5
0:05 AM
1:05 PM
2:21 PM
3:37 PM
11:05 AM
Neanderthal
Cartoons
Trilobites
White Dwarf
Discovery
1/
2/
3/
1
2
3
(MON)
(TUE)
(WED)
Auto action
Cinema
7.
8.
9.
Music
10.
4/10(THU)
Baseball
RETURN
to exit
to select and press
ENTER
0
9
to select and press ENTER
RETURN
to exit
≥To select a 2-digit number
e.g. 23: [S10] ➜ [2] ➜ [3]
≥Press [1] to show the contents of the program.
Playing HighMAT discs [WMA] [MP3] [JPEG]
TOP MENU
PLAY LIST
While the menu is displayed
Playing a play list [RAM]
Select the item following the on-screen instructions.
Menu: Takes you to the
(Only when the disc contains a play list)
New Playlist Item Long Name Display Te
PAGE 1/3
next menu which
shows play lists
or another menu
1
2
Press [PLAY LIST].
Press [3 4] or the
numbered buttons to select
P l a y l i s t
No. Date
Length
0:00:01
T i t l e
City Penguin
Menu2
Menu1
Play list1
1
2
3
4
5
11/1
1/
2/
3/
1
2
3
0:01:20
1:10:04
0:10:20
0:00:01
Ashley at Prom
Formula one
Soccer
Play list: play starts
the play list.
≥Press [ANGLE/PAGE] to skip
page by page.
4/10
Baseball
6
4/11
4/ 15
4/ 17
4/ 20
4/22
0:00:01
0:01:10
0:13:22
0:05:30
0:07:29
City Penguin
Ashley at Prom
Formula one
Soccer
Play list2
Menu3
Play list3
7
8
2
Prev
3
Return
Next1
≥To select a 2-digit number
e.g. 23: [S10] ➜ [2] ➜ [3]
Press [ENTER].
9
10
Baseball
≥To change the menu background
Press [DISPLAY].
The background changes to the one recorded on the disc.
≥To display/exit the screen
0
9
to select and press ENTER
RETURN to exit
3
Press [TOP MENU].
∫ Selecting from the list
1
2
Press [MENU].
P l a y l i s t
All By Artist
No.
Press [2] then [3 4] to
switch among Playlist,
Group and Content lists.
Press [ 1] then [3 4] to
select an item and press
[ENTER].
≥Press [ANGLE/PAGE] to skip
page by page.
Content title
1
2
3
4
5
6
Few times in summer
Playlist
Less and less
Group
And when was born
I
Content
Quatre gymnopedies
You've made me sad
3
I
can't quit him
7
8
9
Evening glory
Wheeling spin
Velvet Cuppermine
10 Ziggy starfish
0
9
to select
ENTER to play
RETURN to exit
≥To exit the screen
Press [MENU].
Tips for making WMA/MP3 and JPEG discs (For CD-R/CD-RW)
≥ Discs must conform to ISO9660 level 1 or 2 (except for extended
formats).
[WMA]
≥You cannot play WMA files that are copy protected.
≥ This unit is compatible with multi-session but if there are a lot of
sessions it takes more time for play to start. Keep the number of
sessions to a minimum to avoid this.
[MP3]
≥This unit is not compatible with ID3 tags.
≥Compatible sampling rate: 8, 11.02, 12, 16, 22.05, 24, 32, 44.1, and
48 kHz
Naming folders and files
e.g. [MP3]
At the time of recording, prefix folder
and file names with 3-digit numbers in
the order you want to play them (this
may not work at times).
Files must have the extension:
“.WMA” or “.wma”
root
001 group
[JPEG]
≥To view JPEG files on this unit:
001 track.mp3
002 track.mp3
003 track.mp3
– Take them on a digital camera that meets the DCF Standard (Design
rule for Camera File system) Version 1.0. Some digital cameras have
functions that are not supported by the DCF Standard Version 1.0
like automatic picture rotation which may render a picture un-
viewable.
– Do not alter the files in any way or save them under a different name.
≥This unit cannot display moving pictures, MOTION JPEG and other
such formats, still pictures other than JPEG (e.g. TIFF) or play
associated sound.
002 group
“.MP3” or “.mp3”
“.JPG”, “.jpg”, “.JPEG” or “.jpeg”
001 track.mp3
002 track.mp3
003 track.mp3
004 track.mp3
003 group
001 track.mp3
002 track.mp3
003 track.mp3
7
Convenient functions
(➜ Refer to the back cover for remote control button positions)
AUDIO
Audio
PLAY SPEED
Changing play speed
[DVD-V] (with multiple soundtracks) [RAM] [VCD]
Press [AUDIO] several times to select the soundtrack.
[RAM] [DVD-V]
Press [W, PLAY SPEED] or [X, PLAY
SPEED].
[RAM] [VCD]
Menu
Audio
DVD-VR
a0.9
You can use this button to select “L”, “R” or “L R”.
[DVD-V] (Karaoke discs)
Press [2 1] to select “On” or “Off” of vocals. Read
the disc’s instructions for details.
–from k0.6 to k1.4 (in 0.1 units)
1
≥After you change the speed
–Digital output switches to PCM-2ch.
–Sampling frequency of 96 kHz is converted to 48 kHz.
≥To return to normal play
Signal type/data
Press [1] (PLAY).
LPCM/Î Digital/DTS/MPEG: Signal type
kHz (Sampling frequency)/bit/ch (Number of channels)
Example: 3/2 .1ch
ZOOM
Zoom
.1: Low frequency effect
(not displayed if there is no signal)
0: No surround
[RAM] [DVD-V] [VCD]
This feature expands the letterbox picture to fit the screen.
1: Mono surround
2: Stereo surround (left/right)
1: Center
Press [ZOOM] several times to select the preset aspect ratio
or “Auto”. (Just Fit Zoom)
2: Front leftiFront right
3: Front leftiFront rightiCenter
Fine adjustments (Manual Zoom)
Press [2 1] .
Menu
GROUP
Starting play from a selected group
–from k1.00 to k1.60 (in 0.01 units)
–from k1.60 to k2.00 (in 0.02 units)
Just Fit Zoom
a
1.00
[WMA] [MP3] [JPEG]
A folder on WMA/MP3 and JPEG discs is treated as a “Group”.
POSITION MEMORY
Position memory
1
2
Press [GROUP].
Press [3 4] to select the item and
press [ENTER].
Menu
(Only when the elapsed play time can be displayed
[JPEG]: Works with all JPEG content.)
Group Search
1
ANGLE/PAGE
This position is memorized even after turning off the unit or changing the disc.
Angle select and Still picture rotation
Press [POSITION MEMORY].
Press [ANGLE/PAGE] several times to select the angle or
rotate the still picture.
[DVD-V] (with multiple angles)–Angle select
[JPEG] –Still picture rotation
Position memorized
≥Up to 5 discs.
≥When the sixth disc is memorized, the earliest position is replaced.
When the unit is turned on or the disc is inserted, “!” flashes on the
display.
Press [1] (PLAY) to start play from that position.
SLEEP
Sleep timer
To review the previous chapters [DVD-V]
Press [1] (PLAY) while the following message is displayed.
Press [SLEEP] to select the time to turn
off (60 min, 90 min, 120 min) or “Auto”.
Menu
Sleep
Press PLAY to preview chapters
Press PLAY to Chapter Review
or
Auto
Auto:
–Turns the unit off 5 minutes after play finishes.
Do not press [1] (PLAY) if you want to cancel review.
–Also works with DVDs that show a menu after play finishes.
–Does not work if you stop play or show a disc menu. It is activated again
when you restart play.
SUBTITLE
Subtitle
To confirm the remaining time
Press [SLEEP] again.
[DVD-V] (with multiple subtitles) [VCD] (SVCD only)
[RAM] (On/Off only)
QUICK REPLAY
Press [SUBTITLE] several times to
select the subtitle language.
To clear/display the subtitles
Press [2 1] to select “On” or “Off”.
Quick replay
Menu
Subtitle
Off
Except [JPEG]
(Only when the elapsed play time can be displayed)
≥[RAM] (Only discs that contain subtitle on/off information)
Press [QUICK REPLAY] to skip back a few
seconds.
Subtitle on/off information cannot be recorded using Panasonic DVD
Recorders. (Subtitle on/off information is also not recordable on
Panasonic DVD-R finalized with a Panasonic DVD Recorder.)
Using On-Screen Menus
(➜ Refer to the back cover for remote control button positions)
1
2
3
4
Select
DISPLAY
Go to the next
menu
1
4
7
2
5
8
0
3
6
Select
RETURN
ENTER
ENTER
9
Register
Return to the
previous menu
Register
10
Press once.
Select the menu.
Make the settings.
Press to exit.
(
\DVD-S27/DVD-S27U\ When
pressed twice, the elapsed play
time indicator appears. ➜ page 9)
Items shown differ depending on the type of software.
8
Using On-Screen Menus
Main menus
To start from a specific item
(➜ page 8)
Program
Group
Title
Audio
To display the current bitrate or sampling frequency
To show thumbnail images
(➜ page 8)
Thumbnail
Subtitle
Marker (VR)
Angle
Chapter
Track
To recall a marker recorded on DVD-Video recorders
(➜ page 8)
Playlist
Content
To skip incrementally or decrementally (Time Slip for play only)
1. Press [ENTER] twice to show Time Slip indicator.
2. Press [3 4] to select the time and press [ENTER].
≥Press and hold [3 4] to change faster.
To start from a specific time (Time Search)
To change remaining/elapsed time display
Rotate
Picture
To turn on/off slideshow
To change the slideshow timing (0–30 sec)
Time
Slideshow
Other settings
∫ Audio Menu
(➜ page 8)
Play Speed
(➜ page 5)
(➜ page 6)
AV
Enhancer
Advanced
Surround
To make the dialogue in movies easier to hear
[DVD-V] (Dolby Digital, DTS, MPEG§, 3-channel or over,
with the dialogue recorded in the center channel)
On ,------. Off
Switch on if sound is distorted. (For AUDIO OUT connection)
On ,------. Off
∫ Play Menu
Dialogue
Enhancer
(Only when the elapsed play time can be displayed
[JPEG]: Works with all JPEG content.)
(➜ page 6)
Repeat
Attenuator
Except
[JPEG]
[RAM] (still
picture part)
A-B
To repeat a specified section
Press [ENTER] at the starting and ending points. Press
[ENTER] again to cancel.
§MPEG: [The\Middle\East,\South\Africa,\Russia,\Australia\and\N.Z.]
∫ Display Menu
On ,------. Off
([JPEG]: Off, Date, Details)
Information
Repeat
To mark up to 5 positions to play again
0 to s60 (in 2 units)
Subtitle
Position
Subtitle
Brightness
[ENTER] (The unit is now ready to accept markers.)
Auto, 0 to s7
To mark a position:
[ENTER] (at the desired point)
Marker
To mark another position:[2 1] ➜ [ENTER]
To select how to show images made for 4:3 aspect
screens on a 16:9 aspect television.
Normal: Laterally stretches images.
To recall a marker:
To erase a marker:
≥This feature doesn’t work during program and random
[2 1] ➜ [ENTER]
[2 1] ➜ [CANCEL]
Auto:
Expands 4:3 letterbox images to fill more of the
screen. Other images appear in full in the center
of the screen.
play.
4:3 Aspect
∫ Picture Menu
Shrink: Images appear in the center of the screen.
Zoom: Expands all images to fill the screen.
If your television has a similar feature, use it instead for a
better effect.
(➜ page 5)
Picture
Mode
Video
Output
Mode
480I (Interlace) ,--. 480P (Progressive)
(➜ page 8)
(➜ page 8)
On ,------. Off
s3 to r3
Just Fit Zoom
Manual Zoom
GUI See-through
GUI Brightness
If you have chosen “480P” (➜ above), select the method
of conversion for progressive output to suit the type of
material.
Transfer
Mode
∫ Other Menu
Sleep
Auto 1 (normal): For viewing film material
Auto 2: For viewing film material (the same as Auto 1,
but able to convert 30-frame-per-second
progressive video)
(➜ page 8)
While stopped
Play as DVD-VR
Play as HighMAT
or
≥ Select “Play as Data Disc” to play
JPEG files on DVD-RAM or to play a
HighMAT disc without using the
HighMAT function.
Video: For video material
Play as Data Disc
\DVD-S27/DVD-S27U\
∫ Elapsed play time indicator
Condition–
play, pause or slow/search
Play mode
Current position
: Normal Play
PGM: Program Play
RND: Random Play
Elapsed play time
Current playback item
9
Changing the player settings (‹ Refer to the back cover for remote control button positions)
≥The settings remain intact even if you switch the unit to standby.
The QUICK SETUP enables successive settings of the items in the
shaded area.
≥Underlined items are the factory preset.
≥See page 11 for operation.
∫ “Disc” tab
§3
§3
§3
≥ (Language options)§1
≥ Original§2
≥ Other¢¢¢¢
≥ Other¢¢¢¢
≥ Other¢¢¢¢
Audio
≥ English
Choose the audio language.
Subtitle
Choose the subtitle language.
≥ Automatic§4 ≥ English
≥ (Language options)§1
≥ English
≥ (Language options)§1
Menus
Choose the language for disc menus.
≥Changing the menu language from QUICK SETUP also changes this setting.
Ratings
Setting ratings (When level 8 is selected)
Set a ratings level to limit DVD-Video play.
≥Follow the on-screen instructions.
≥ 8 No Limit ≥ 1 to 7
≥ 0 Lock All: To prevent play of discs without ratings levels.
Changing ratings (When level 0–7 is selected)
≥ Unlock Player ≥ Change Password ≥ Change Level
≥ Temporary Unlock
∫ “Video” tab
TV Aspect
Choose the setting to suit your television
and preference.
≥ 4:3 Pan&Scan: Regular aspect television (4:3)
The sides of the widescreen picture are cut off so it fills the screen (unless
prohibited by the disc).
≥ 4:3 Letterbox: Regular aspect television (4:3)
Widescreen picture is shown in the letterbox style.
≥ 16:9: Widescreen television (16:9)
Progressive Out (Component)
≥ Disable: Interlace output
≥ Enable§5 or ≥ Enable (NTSC Disc Only)§6§7: Progressive output
TV Type
≥ Standard(Direct View TV) ≥ CRT Projector
≥ Plasma TV
≥ LCD TV/Projector ≥ Projection TV
Select to suit the type of television.
Time Delay
≥ 0ms
≥ 20ms
≥ 40ms
≥ 60ms ≥ 80ms ≥ 100ms
When connected with an AV amplifier and
Plasma display, adjust if you notice the
audio is out of sync with the video.
Still Mode
≥ Automatic
≥ Field: The picture is not blurred, but picture quality is lower.
Specify the type of picture shown when paused.
Black Level Control§5
Change the black level of the picture if you
connected a television through the
COMPONENT VIDEO OUT terminals.
NTSC Disc Output§6§7
Choose PAL 60 or NTSC output when playing
NTSC discs.
≥ Frame: Overall quality is high, but the picture may appear blurred.
≥ Lighter: When connected through VIDEO OUT or S VIDEO OUT.
≥ Darker: When connected through COMPONENT VIDEO OUT.
≥ PAL60: When connected to a PAL television
≥ NTSC: When connected to an NTSC television ([Asia]: “NTSC” is the factory preset.)
∫ “Audio” tab
PCM Digital Output
≥ Up to 48 kHz: When connected to equipment compatible with 44.1 or 48 kHz
≥ Up to 96 kHz: When connected to equipment compatible with 88.2 or 96 kHz
– Signals that exceed the set maximum frequency and signals from copy-protected discs are converted
to 48 or 44.1 kHz.
– Some equipment cannot handle sampling frequencies of 88.2 kHz, even if they can handle 96 kHz.
Read your equipment’s operating instructions for details.
Check the digital input limitations of the
equipment you connect using COAXIAL
terminal and select the maximum sampling
frequency of PCM digital output.
Dolby Digital
DTS Digital Surround
Select “Bitstream” when the equipment can decode the bitstream (digital
form of multi-channel data). Otherwise, select “PCM”.
≥If the bitstream is output to the equipment without a decoder, high levels
of noise can be output and may damage your speakers and hearing.
≥ Bitstream ≥ PCM
≥ PCM
≥ Bitstream
≥ Bitstream
7
MPEG§
≥ PCM
Dynamic Range Compression
≥ Off
≥ On: Adjusts for clarity even when the volume is low through compressing the range of the lowest sound
level and the highest sound level. Convenient for late night viewing. (Only works with Dolby Digital)
Audio during Search
≥ On
≥ Off
∫ “Display” tab
§5
≥English ≥Français ≥Español
§6
Menu Language
≥English
≥
§7 ≥English ≥Français ≥Deutsch ≥Italiano ≥Español ≥Português≥Svenska ≥Nederlands
On-Screen Messages
≥ On
≥ Off
∫ “Others” tab
FL Dimmer
Changes the brightness of the unit’s display.
≥ Bright
≥ Dim
≥ Auto: The display is dimmed during play, but brightens when you perform some operations.
Auto Power Off
≥ On: The unit switches to standby mode after approximately 30 minutes in the stop mode,
irrespective of the SLEEP setting.
≥ Off
HighMAT
≥ Enable
≥ Disable (Unable to use the HighMAT function.)
QUICK SETUP
≥ Yes
≥ No
Re-initialize Setting
≥ Yes: The password screen is shown if “Ratings” (➜ above) are set. Please enter the same password.
This returns all values in the Setup menus to
the default settings.
After “INI” on the display disappears, turn the unit off and on again.
≥ No
§1
§3
Language options
Input a code number referring to the table on page 11.
If the language selected for “Audio” is not available, subtitle appear in
that language (If available on the disc).
[U.S.A.,\Canada[and\units\with\PX\printed\on\the\outer\packaging\
[Asia]
[The\Middle\East,\South\Africa,\Russia,\Australia\and\N.Z.]
§4
[U.S.A.,\Canada[and\units\with\PX\printed\on\the\outer\packaging\ :
French and Spanish
[Asia] : Chinese
§5
§6
§7
[The\Middle\East,\South\Africa,\Russia,\Australia\and\N.Z.] :
French, German, Italian, Spanish, Portuguese, Swedish and Dutch
The original language designed on the disc is selected.
§2
10
1
2
3
4
5
Select
Select
Select
1
4
7
2
5
8
0
3
6
SETUP
SETUP
ENTER
ENTER
ENTER
9
Go right
Register
Register
10
Shows Setup menu.
Select the tab.
Select the item.
Make the settings.
Press to exit.
Language code list
Abkhazian:
Afar:
Afrikaans:
Albanian:
Ameharic:
Arabic:
Armenian:
Assamese:
Aymara:
6566
6565
6570
8381
6577
6582
7289
6583
6588
6590
6665
6985
Chinese:
Corsican:
Croatian:
Czech:
Danish:
Dutch:
English:
Esperanto:
Estonian:
Faroese:
Fiji:
Finnish:
French:
Frisian:
9072
6779
7282
6783
6865
7876
6978
6979
6984
7079
7074
7073
7082
7089
7176
7565
6869
6976
Hausa:
Hebrew:
Hindi:
7265
7387
7273
7285
7383
7378
7365
7165
7384
7465
7487
7578
7583
7575
7589
7579
7585
7679
7665
Lithuanian:
7684
Romanian:
Russian:
Samoan:
Sanskrit:
Scots Gaelic: 7168
Serbian: 8382
Serbo-Croatian:8372
Shona:
Sindhi:
Singhalese:
Slovak:
Slovenian:
Somali:
Spanish:
Sundanese:
Swahili:
Swedish:
Tagalog:
Tajik:
8279
8285
8377
8365
Telugu:
Thai:
8469
8472
6679
8473
8479
8482
8475
8487
8575
8582
8590
Macedonian: 7775
Malagasy:
Malay:
Malayalam:
Maltese:
Maori:
Marathi:
Moldavian:
Mongolian:
Nauru:
Nepali:
Norwegian:
Oriya:
Pashto, Pushto:8083
Persian:
Polish:
7771
7783
7776
7784
7773
7782
7779
7778
7865
7869
7879
7982
Tibetan:
Tigrinya:
Tonga:
Turkish:
Turkmen:
Twi:
Ukrainian:
Urdu:
Uzbek:
Hungarian:
Icelandic:
Indonesian:
Interlingua:
Irish:
8378
8368
8373
8375
8376
8379
6983
8385
8387
8386
8476
8471
8465
8484
Italian:
Azerbaijani:
Bashkir:
Basque:
Japanese:
Javanese:
Kannada:
Kashmiri:
Kazakh:
Kirghiz:
Vietnamese: 8673
Bengali; Bangla:6678
Volapük:
Welsh:
Wolof:
Xhosa:
Yiddish:
Yoruba:
Zulu:
8679
6789
8779
8872
7473
8979
9085
Bhutani:
Bihari:
Breton:
6890
6672
6682
6671
7789
Galician:
Georgian:
German:
Greek:
Korean:
7065
8076
8084
8065
8185
Bulgarian:
Burmese:
Byelorussian: 6669
Kurdish:
Laotian:
Latin:
Portuguese:
Punjabi:
Quechua:
Rhaeto-Romance
Greenlandic: 7576
Cambodian:
Catalan:
7577
6765
Guarani:
Gujarati:
7178
7185
Latvian, Lettish:7686
Lingala:
Tamil:
Tatar:
7678
:8277
Specifications
Signal system:
[U.S.A.,\Canada[and\units\with\PX\printed\on\the\outer\packaging\
Audio output:
Output level:
2 Vrms (1 kHz, 0 dB)
Pin jack
NTSC
Output connector:
[Other\areas]
PAL 625/50, PAL 525/60, NTSC
i5 to i35 oC (i41 to i95 xF)
5 to 90 % RH (no condensation)
Number of connectors:
Audio performance:
(1) Frequency response:
≥DVD (linear audio):
2 channel: 1 system
Operating temperature range:
Operating humidity range:
Discs played [8 cm (3 z) or 12 cm (5 z)]:
4 Hz–22 kHz (48 kHz sampling)
4 Hz–44 kHz (96 kHz sampling)
4 Hz–20 kHz
(1) DVD-RAM (DVD-VR compatible, JPEG formatted discs)
(2) DVD-Video
(4) CD-Audio (CD-DA)
(3)DVD-R (DVD-Video compatible)
(5)Video CD
≥CD Audio:
(2) S/N ratio:
(6) SVCD (Conforming to IEC62107)
(7) CD-R/CD-RW
≥ CD Audio:
115 dB
(3) Dynamic range:
≥DVD (linear audio):
≥CD Audio:
(CD-DA, Video-CD, SVCD, MP3, WMA, JPEG formatted discs)
100 dB
98 dB
(8) MP3/WMA§
≥Compatible compression rate:
MP3:
(4) Total harmonic distortion:
≥CD Audio:
between 32 kbps and 320 kbps
between 48 kbps and 320 kbps
0.0025 %
Pin jack
WMA:
Digital audio output:
Coaxial digital output:
Pickup:
(9) JPEG§
≥Exif Ver 2.1 JPEG Baseline files
≥Picture resolution:
between 320k240 and 6144k4096 pixels
Wave length:
662 nm/785 nm
(sub sampling is 4:2:2 or 4:2:0)
Laser power:
(10) HighMAT Level 2 (Audio and Image)
[U.S.A.\
CLASS IIa/CLASS I
CLASS 2/CLASS 3A
[Other\areas]
Power supply:
Video output:
Output level:
Output connector:
S-video output:
Y output level:
C output level:
[U.S.A.\and\Canada\
[Russia,\Australia\and\N.Z.]
[Other\areas]
AC 120 V, 60 Hz
AC 220–240 V, 50 Hz
AC 110–240 V, 50/60 Hz
1 Vp-p (75 ≠)
Pin jack (1 system)
Power consumption:
[U.S.A.\and\Canada[
[Other\areas]
Power consumption in standby mode:
Dimensions:
1 Vp-p (75 ≠)
8 W
9 W
1 W
[U.S.A.,\Canada[and\units\with\PX\printed\on\the\outer\packaging\
0.286 Vp-p (75 ≠)
430 (W)k227 (D)k55 (H) mm
[Other\areas]
NTSC; 0.286 Vp-p (75 ≠)
PAL; 0.300 Vp-p (75 ≠)
S terminal (1 system)
[16 15/16z (W)k8 15/16z (D)k2 3/16z (H)]
Mass:
1.9 kg (4.2 lb)
Output connector:
Component video output:
[U.S.A.\and\Canada\
[Other\areas]
[Note]
Specifications are subject to change without notice. Mass and dimensions
are approximate.
(480P/480I)
(NTSC: 480P/480I, PAL: 576I)
1 Vp-p (75 ≠)
§
The total combined maximum number of recognizable audio and picture
contents and groups: 4000 audio and picture contents and 400 groups.
Y output level:
PB output level:
0.7 Vp-p (75 ≠)
PR output level:
Output connector:
Number of connectors:
0.7 Vp-p (75 ≠)
Pin jack (Y: green, PB: blue, PR: red)
1 system
11
Troubleshooting guide
Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the remedies indicated in the chart do not
solve the problem, refer to the “Customer Services Directory” on page 14 if you reside in the U.S.A., or refer to the “Product information” on page 13 if
you reside in Canada. In other areas, consult your dealer.
Power
Page
No power.
≥ Insert the AC power supply cord securely into the household AC outlet.
4
The unit is automatically
switched to the standby mode.
≥ When “Auto Power Off” is set to “On”, the unit automatically switches to standby after
approximately 30 minutes in the stop mode.
≥ The Sleep timer functioned.
10
8
No operation
No response when any buttons
pressed.
≥ This unit cannot play discs other than the ones listed in these operating instructions.
3
–
≥
The unit may not be operating properly due to lightning, static electricity or some other external
factor. Turn the unit off and then back to ON. Alternatively, turn the unit off, disconnect the AC
power supply cord, and then reconnect it.
≥ Condensation has formed: Wait 1 to 2 hours for it to evaporate.
–
No response when remote
control buttons pressed.
≥ Check that the batteries are installed correctly.
≥ The batteries are depleted: Replace them with new ones.
≥ Point the remote control at the remote control sensor and operate.
4
4
5
No picture or sound.
≥ Check the video or audio connection.
≥ Check the power or input setting of the connected equipment.
≥ Check that the DVD-RAM has something recorded on it.
4
–
–
You have forgotten your ratings
password.
Reset all the settings to Factory
Preset.
≥ While stopped, press and hold [D] and [;] on the unit and then also press and hold [<]
on the unit until “Initialized” disappears from the television. Turn the unit off and on again. All
settings will return to the default values.
–
Specific operation impossible or incorrect
It takes time before play starts.
[MP3]
≥ Play may take time to begin when an MP3 track has still picture data. Even after the track starts,
the correct play time will not be displayed, however this is normal.
–
–
–
Programmed items are not
played. [DVD-V]
≥ Some items cannot be played even if you have programmed them.
A menu screen appears during
≥ This is normal for Video CDs.
skip or search. [VCD]
Subtitle
Subtitle position is wrong.
No subtitles.
≥ Adjust the position. (“Subtitle Position” in Display Menu)
≥ Display the subtitles.
9
8
8
The subtitles overlap closed
captions recorded on discs.
≥ Clear the subtitles.
A-B repeat
Point B is automatically set.
≥ The end of an item becomes point B when it is reached.
–
–
A-B repeat is automatically canceled. ≥ A-B repeat is canceled when you press [QUICK REPLAY].
Picture incorrect
Picture distorted.
≥ Ensure that the unit is connected directly to the television, and is not connected through a video
cassette recorder.
4
Picture size doesn’t fit the
screen.
≥ Change “TV Aspect” in “Video” tab.
10
9
≥ Use the television to change the aspect. If your television does not have that function, change
“4:3 Aspect” in Display Menu.
≥ Change the Zoom setting.
8
–
The television may display
incorrectly or colors appear
faded.
≥ The unit and television are using different video systems.
[U.S.A.,\Canada,\Asia,\and]units\with\PX\printed\on\the\outer\packaging\
Use a multi-system or NTSC television.
[Other\areas]
Use a multi-system or PAL television.
≥ The system used on the disc doesn’t match your television.
[U.S.A.,\Canada[and]units\with\PX\printed\on\the\outer\packaging\
–PAL discs cannot be played.
–
[Other\areas]
–PAL discs cannot be correctly viewed on an NTSC television.
–This unit can convert NTSC signals to PAL 60 for viewing on a PAL television (“NTSC Disc
Output” in “Video” tab).
–
10
Menu not displayed correctly.
≥ Restore the zoom ratio to a1.00.
≥ Set “Subtitle Position” in Display Menu to “0”.
≥ Set “4:3 Aspect” in Display Menu to “Normal”.
8
9
9
Auto zoom function does not
work well.
≥ Turn off TV’s zoom function.
–
8
–
≥ Use the other preset aspect ratios or manual adjustment.
≥ Zoom function may not work well, especially in dark scenes and may not work depending on the
type of disc.
Progressive video
There is ghosting when
progressive output is on.
≥ Change “Video Output Mode” in Picture Menu to “480I”. This problem is caused by the editing
method or material used on DVD-Video, but should be corrected if you use interlace output.
9
Pictures not in progressive
output.
≥ If the unit is connected to the television through VIDEO OUT or S VIDEO OUT, output will be
–
interlace.
≥ Select “Enable” in “Progressive Out (Component)” in “Video” tab. Then, select “480P” in “Video
Output Mode” in Picture Menu.
9, 10
Closed captions not displayed.
≥ When progressive output is on, closed captions will not be displayed.
–
12
Sound incorrect
Sound distorted.
Page
≥Select “Off” in “Advanced Surround”.
≥Select “On” in “Attenuator” in Audio Menu if it causes distortion with AUDIO OUT connections.
≥Noise may occur when playing WMA files.
6
9
–
Piercing noise comes from the
speakers.
≥If you have connected a digital amplifier which does not include decoder, be sure to select “PCM”
10
in “Dolby Digital”, “DTS Digital Surround” or “MPEG§” in “Audio” tab.
Effects do not work.
≥None of the audio effects work when the unit is outputting bitstream signals from the DIGITAL
AUDIO OUT terminal. In this case, connect with the AUDIO OUT terminal.
≥Some audio effects do not work or have less effect with some discs.
4
–
–
≥Advanced surround does not work if you have changed the play speed.
Recording
Cannot record to digital
recording equipment.
(Incorrect sound recorded.)
≥You cannot record WMA/MP3.
–
–
–
≥You cannot record DVDs that have protection preventing digital recording.
≥You cannot record DVDs if the recording equipment cannot handle signals with a sampling
frequency of 48 kHz.
≥Make the following settings:
– Advanced Surround:
– PCM Digital Output:
– Dolby Digital/DTS Digital Surround/MPEG§: PCM
Off
6
10
10
Up to 48 kHz
Unit displays
“noPLAy”
≥You inserted a disc the unit cannot play; insert one it can.
≥You inserted a blank disc.
3
–
“U11”
“U15”
≥Disc is dirty: Wipe it clean.
3
3
–
≥You inserted a DVD-R that has not been finalized.
“H∑∑”
∑∑ stands for a number.
≥Trouble may have occurred. The number following “H” depends on the status of the unit. Turn the
unit off and then back to ON. Alternatively, turn the unit off, disconnect the AC power supply cord,
and then reconnect it.
≥If the service numbers fail to clear, note the service number and contact a qualified service
person.
–
“nodISC”
≥You haven’t inserted a disc: Insert one.
≥You haven’t inserted the disc correctly: Insert it correctly.
–
5
Television displays
“/”
≥The operation is prohibited by the unit or disc.
–
7
“Cannot display group xx,
content xx”
≥You are trying to display incompatible contents.
“The progressive out is set to
“Disable””
≥Select “Enable” in “Progressive Out (Component)” in “Video” tab.
10
“This disc may not be played in
your region”
≥You can only play DVD-Video if their region number is the same or includes the same region
number as the unit or if the DVD-Video is marked “ALL”. Confirm the region number for the unit on
the rear panel.
Cover
No on-screen display.
≥Select “On” in “On-Screen Messages” in “Display” tab.
10
§MPEG: [The\Middle\East,\South\Africa,\Russia,\Australia\and\N.Z.]
Product Service
1. Damage requiring service—The unit should be serviced by qualified
service personnel if:
Product information
(a) The AC power supply cord or AC adaptor has been damaged; or
(b) Objects or liquids have gotten into the unit; or
For product information or assistance with product operation:
(c) The unit has been exposed to rain; or
In the U.S.A., refer to “Customer Services Directory” on page 14.
(d) The unit does not operate normally or exhibits a marked change in
performance; or
(e) The unit has been dropped or the cabinet damaged.
2. Servicing—Do not attempt to service the unit beyond that described
in these operating instructions. Refer all other servicing to authorized
servicing personnel.
In Canada, contact the Panasonic Canada Inc. Customer Care Centre at
authorized Servicentre closest to you.
3. Replacement parts—When parts need replacing ensure the servicer
uses parts specified by the manufacturer or parts that have the same
characteristics as the original parts. Unauthorized substitutes may
result in fire, electric shock, or other hazards.
4. Safety check—After repairs or service, ask the servicer to perform
safety checks to confirm that the unit is in proper working condition.
Maintenance
Clean this unit with a soft, dry cloth.
≥Never use alcohol, paint thinner or benzine to clean this unit.
≥Before using chemically treated cloth, read the instructions that came with the cloth carefully.
13
Limited Warranty (ONLY FOR U.S.A.)
Panasonic Consumer Electronics Company,
Division of Matsushita Electric Corporation of America
One Panasonic Way Secaucus, New Jersey 07094
Panasonic Sales Company, Division of Matsushita Electric
of Puerto Rico, Inc.,
Ave. 65 de Infantería, Km. 9.5
San Gabriel Industrial Park, Carolina, Puerto Rico 00985
Panasonic DVD Player Limited Warranty
Limited Warranty Coverage
IF REPAIR IS NEEDED DURING THE LIMITED WARRANTY PERIOD THE
PURCHASER WILL BE REQUIRED TO FURNISH A SALES RECEIPT/PROOF OF
PURCHASE INDICATING DATE OF PURCHASE, AMOUNT PAID AND PLACE OF
PURCHASE. CUSTOMER WILL BE CHARGED FOR THE REPAIR OF ANY UNIT
RECEIVED WITHOUT SUCH PROOF OF PURCHASE.
If your product does not work properly because of a defect in materials or workmanship,
Panasonic Consumer Electronics Company or Panasonic Sales Company (collectively
referred to as “the warrantor”) will, for the length of the period indicated on the chart below,
which starts with the date of original purchase (“Limited Warranty period”), at its option
either (a) repair your product with new or refurbished parts, or (b) replace it with a new or
a refurbished product. The decision to repair or replace will be made by the warrantor.
Limited Warranty Limits And Exclusions
This Limited Warranty ONLY COVERS failures due to defects in materials or workmanship,
and DOES NOT COVER normal wear and tear or cosmetic damage. The Limited Warranty
ALSO DOES NOT COVER damages which occurred in shipment, or failures which are
caused by products not supplied by the warrantor, or failures which result from accidents,
misuse, abuse, neglect, mishandling, misapplication, alteration, faulty installation, set-up
adjustments, misadjustment of consumer controls, improper maintenance, power line
surge, lightning damage, modification, or commercial use (such as hotel, office, restaurant,
or other business), rental use of the product, or service by anyone other than a Factory
Servicenter or other Authorized Servicer, or damage that is attributable to acts of God.
Product or Part Name
DVD Player
Parts
Labor
One (1) Year
Ninety (90) Days
Rechargeable Batteries
(in exchange for defective item)
Ten (10) Days
Not Applicable
During the “Labor” Limited Warranty period there will be no charge for labor. During
the “Parts” warranty period, there will be no charge for parts. You must mail-in your
product during the warranty period. If non-rechargeable batteries are included, they
are not warranted. This Limited Warranty only applies to products purchased and
serviced in the United States or Puerto Rico. This Limited Warranty is extended only to
the original purchaser and only covers product purchased as new. A purchase receipt
or other proof of original purchase date is required for Limited Warranty service.
THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER “LIMITED
WARRANTY COVERAGE”. THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR
CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR
ARISING OUT OF ANY BREACH OF THIS WARRANTY. (As examples, this excludes
damages for lost time, cost of having someone remove or re-install an installed unit if
applicable, travel to and from the servicer, loss of or damage to media or images, data or
other recorded content. The items listed are not exclusive, but are for illustration only.)
ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF
MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF THE LIMITED WARRANTY.
Mail-In Service
For assistance in the continental U.S.A. in obtaining repairs please ship the product to:
Panasonic Services Company
Customer Servicenter
Suite B
4900 George McVay Drive
Some states do not allow the exclusion or limitation of incidental or consequential damages, or
limitations on how long an implied Limited Warranty lasts, so the exclusions may not apply to you.
McAllen, TX 78503
This Limited Warranty gives you specific legal rights and you may also have other rights which vary
from state to state. If a problem with this product develops during or after the Limited Warranty
period, you may contact your dealer or Servicenter. If the problem is not handled to your satisfaction,
then write to the warrantor’s Consumer Affairs Department at the addresses listed for the warrantor.
For assistance in Puerto Rico call Panasonic Sales Company (787)-750-4300 or fax
(787)-768-2910.
When shipping the unit carefully pack and send it prepaid, adequately insured and
preferably in the original carton. Include a letter detailing the complaint and provide a
day time phone and/or email address where you can be reached.
PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY,
ARE YOUR RESPONSIBILITY.
Customer Services Directory
Obtain Product Information and Operating Assistance; locate your nearest Dealer or Servicenter; purchase Parts and
Accessories; or make Customer Service and Literature requests by visiting our Web Site at:
or, contact us via the web at:
You may also contact us directly at:
1-800-211-PANA (7262),
Monday-Friday 9 am-9 pm; Saturday-Sunday 10 am-7 pm, EST.
For hearing or speech impaired TTY users, TTY: 1-877-833-8855
Accessory Purchases
Purchase Parts, Accessories and Instruction Books online for all Panasonic Products by visiting our Web Site at:
or, send your request by E-mail to:
You may also contact us directly at:
1-800-332-5368 (Phone) 1-800-237-9080 (Fax Only) (Monday – Friday 9 am to 8 pm, EST.)
Panasonic Services Company
20421 84th Avenue South, Kent, WA 98032
(We Accept Visa, MasterCard, Discover Card, American Express, and Personal Checks)
For hearing or speech impaired TTY users, TTY : 1-866-605-1277
Service in Puerto Rico
Matsushita Electric of Puerto Rico, Inc. Panasonic Sales Company
Factory Servicenter:
Ave. 65 de Infantería, Km. 9.5, San Gabriel Industrial Park, Carolina, Puerto Rico 00985
Phone (787)750-4300, Fax (787)768-2910
F1003
User memo:
DATE OF PURCHASE ___________________________________
DEALER NAME ________________________________________
DEALER ADDRESS _____________________________________
______________________________________________________
TELEPHONE NUMBER __________________________________
The model number and serial number of this product can be found on
either the back or the bottom of the unit. Please note them in the
space provided below and keep for future reference.
MODEL NUMBER
SERIAL NUMBER
14
Referencia rápida en español
Conexiones
∫ Conexión a un televisor
AV ENHANCER FL SELECT OPEN/CLOSE
ADVANCED
PICTURE MODE
SURROUND
REPEAT
Televisor
A una toma de CA
1
4
2
5
8
0
3
PLAY SPEED
POSITION MEMORY
QUICK REPLAY
6
AUDIO IN
VIDEO
IN
7
CANCEL
9
R
L
10
SKIP
STOP
SLOW/SEARCH
Cable de
audio/
Cable de
alimentación
de CA
PAUSE
PLAY
vídeo
DIRECT NAVIGATOR
TOP MENU
PLAY LIST
MENU
(incluido)
(incluido)
ENTER
DISPLAY
RETURN
SUBTITLE AUDIO ANGLE/PAGE SETUP
PAY MODSLEE
ZOM
GROUP
La posición se memoriza cuando “!”
parpadea en el visualizador.
Parada [∫]
AC IN
≥Pulse [1] (PLAY) para proseguir.
≥Pulse [∫] para borrar la posición.
≥Pulse [1] (PLAY) para reiniciar la
Parte posterior del aparato
Pausa [;]
reproducción.
(Salto de grupo [WMA] [MP3] [JPEG]
[3 4])
≥Hasta 5 pasos
≥Pulse [1] (PLAY) para iniciar la
reproducción.
≥Conecte el cable de alimentación de CA el último.
Salto [: 9]
PREPARACIÓN RÁPIDA
Encienda el televisor y seleccione la entrada de vídeo apropiada
en el mismo.
Búsqueda
(durante la
reproducción)
[6 5]
≥[VCD] Cámara lenta, sentido de
avance solamente
[Í]
Encienda.
1
2
3
Cámara lenta
(durante la pausa)
[6 5]
Cuadro a cuadro
(durante la pausa)
[2 1]
[SETUP]
Muestra la pantalla QUICK SETUP.
[
3 4
[ENTER]
[RETURN]
]
Pulse [3 4] para seleccionar
“Español” y pulse [ENTER].
Siga el mensaje y haga los ajustes.
≥[VCD] Sentido de avance solamente
Selección de
[ENTER]
Pulse para terminar PREPARACIÓN
RÁPIDA.
4
5
elemento en pantalla
[
3 4 2 1
]
[SETUP]
Pulse para salir.
[ENTER]
Introduzca número
Botones numerados
[RAM] [DVD-V] [VCD] [CD]
Ej.: Para seleccionar 12:
[S10] ➜ [1] ➜ [2]
Reproducción básica
[Í]
Encienda.
1
2
3
4
[VCD] con control de reproducción
Durante la parada, pulse los botones numerados.
[<
]
Abre el cajón.
[WMA] [MP3] [JPEG]
Ej.: Para seleccionar 123:
[1] ➜ [2] ➜ [3] ➜ [ENTER]
Introduzca el disco.
Inicie la reproducción.
Menú de disco
[TOP MENU]
[
1] (PLAY)
[DVD-V]
Muestra un menú inicial de disco
[DVD-V] Muestra un menú de disco
[MENU]
[VCD] Muestra un menú de disco
[RETURN]
Vuelta a la pantalla
anterior
[RETURN]
Visualización de números
:;
Visualización de tiempo
Visualizador del
aparato principal
[FL SELECT]
15
Main feature index
Recalls recommended audio/
Changes the unit’s display (➜page 5)
video setting (➜page 5)
FL SELECT OPEN/CLOSE
AV ENHANCER
ADVANCED
SURROUNDPICTUREMODE REPEAT
Repeat play (➜page 6)
To enjoy virtual surround with
television’s speakers (➜page 6)
1
4
2
5
8
0
3
6
PLAY SPEED
POSITION MEMORY
QUICK REPLAY
To select the preset picture
quality (➜page 5)
Changes play speed (➜page 8)
Memorizes the position during play
(➜page 8)
Skips back a few seconds (‹page 8)
7
CANCEL
9
10
SKIP
SLOW/SEARCH
STOP
PAUSE
PLAY
DIRECT NAVIGATOR
TOP MENU
PLAY LIST
MENU
Shows a disc top menu (➜page 5)
Shows a program list (➜page 7)
Shows a disc menu (➜page 5)
Shows a play list (➜page 7)
ENTER
Shows On-Screen Menus
DISPLAY
RETURN
(➜page 8)
Changes angles or rotates still pictures
(➜page 8)
Changes subtitles (➜page 8)
Changes soundtracks (➜page 8)
Program/random play (➜page 6)
SUBTITLE AUDIO ANGLE/PAGE SETUP
PLAYMODE SLEEP
ZOOM
GROUP
Selects groups to play (➜page 8)
Changes the zoom ratio (➜page 8)
Sleep timer (➜page 8)
[For\U.S.A.\and\Canada\
Manufactured under license from Dolby Laboratories. “Dolby” and
the double-D symbol are trademarks of Dolby Laboratories.
§
As an ENERGY STAR® Partner,
Panasonic has determined that
“DTS” and “DTS 2.0 i Digital Out” are trademarks of Digital
Theater Systems, lnc.
this product meets the ENERGY STAR®
guidelines for energy efficiency.
Apparatus Claims of U.S. Patent Nos. 4,631,603, 4,577,216, and
4,819,098, licensed for limited viewing uses only.
This product incorporates copyright protection technology that is
protected by method claims of certain U.S. patents and other
intellectual property rights owned by Macrovision Corporation and
other rights owners. Use of this copyright protection technology
must be authorized by Macrovision Corporation, and is intended
for home and other limited viewing uses only unless otherwise
authorized by Macrovision Corporation. Reverse engineering or
§For Canada only: The word “Participant” is used in place of
the word “Partner”.
CLASS 1
disassembly is prohibited.
MPEG Layer-3 audio decoding technology licensed from
Fraunhofer IIS and Thomson multimedia.
LASER PRODUCT
Windows Media, and the Windows logo
are trademarks, or registered trademarks
of Microsoft Corporation in the United
States and/or other countries.
WMA is a compression format developed
by Microsoft Corporation. It achieves the
same sound quality as MP3 with a file
size that is smaller than that of MP3.
The laser product label has not been attached to products for the
U.S.A. and Canada.
pr
[For\U.S.A.]
[For\Canada]
Panasonic Consumer Electronics Company,
Division of Matsushita Electric Corporation of
America
Panasonic Sales Company,
Panasonic Canada Inc.
Division of Matsushita Electric of 5770 Ambler Drive, Mississauga,
Puerto Rico, Inc. (“PSC”)
Ave. 65 de Infantería, Km. 9.5
San Gabriel Industrial Park, Carolina,
Puerto Rico 00985
Ontario L4W 2T3
One Panasonic Way Secaucus, New Jersey 07094
\For\units\with\PX\printed\on\the\outer\packaging]
Matsushita Electric Industrial Co., Ltd. Corporate
Management Division for the Americas
Sales Office for North America
Tokyo Panasonic Sales Section
32nd Floor, World Trade Center 4-1, Hamamatsu-cho,
2-Chome, Minato-Ku, Tokyo 105-6132, Japan
[For\others]
Panasonic Marketing Europe
G.M.B.H. Wiesbaden N.
(a Division of Panasonic Marketing
G.M.B.H.)
Matsushita Electric Industrial Co., Ltd.
Military Sales Department
6200 Wiesbaden-Biebrich, Hagenauerstr.
43 Germany
RQT7240-1P
F0104AK1024
C 2004 Matsushita Electric Industrial Co., Ltd.
|